Dansk
Svenska
Nederlands
Deutsch
English
Elring DIRKO HT (315 C) liquid gasket kit, red, silicone compound, 70 ml (new composition 2021)
Beskrivning
Dirko™ HT red (acetic curing) is a high-quality, high
temperature resistant single component silicone-based
sealing compound that exhibits permanently resilient
properties. It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and
PTFE) and glass. Due to a reaction with humidity in the
air Dirko™ HT red cures to form silicone. The product
can be used for a very wide range of applications
Resistant to:
Mineral oils (including additives), synthetic oils,
Lubricating grease, Coolants, UV radiation , cold
and hot water, salt water , cleaning agents, weak
acids and alkalis
Possible applications:
valve cover, oil pan , water pump , oil pump , diff,
rential housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover, lange
connection , headlights, rear light , battery compartment
In 70ml tube incl. Accessories.
Elring P/N: 705.708
EAN: 4041248845660
temperature resistant single component silicone-based
sealing compound that exhibits permanently resilient
properties. It provides excellent adhesion on all standard metals, cast iron, plastics (except for PE, PP and
PTFE) and glass. Due to a reaction with humidity in the
air Dirko™ HT red cures to form silicone. The product
can be used for a very wide range of applications
Resistant to:
Mineral oils (including additives), synthetic oils,
Lubricating grease, Coolants, UV radiation , cold
and hot water, salt water , cleaning agents, weak
acids and alkalis
Possible applications:
valve cover, oil pan , water pump , oil pump , diff,
rential housing , gearbox, gear oil sump , thermostat housing , control housing , axle cover, lange
connection , headlights, rear light , battery compartment
In 70ml tube incl. Accessories.
Elring P/N: 705.708
EAN: 4041248845660
Specifikationer
| Colour | Red |
| Oil resistant | Yes |
| Max temp (°C) | +315 °C (24u) |
| Max continuous temp (°C) | -60 to +300 |
| Chemical basis | Acetoxy silicone |
| Components | Single component |
| Maximum sealing gap | 2,0 mm |
| Hardness | 30 ± 5 |
| Density (g/ml) | 1,1 ± 0,2 |
| volume | 70 ml |
| Curing | Room temperature vulcanised (RTV) |
| Consistency | Pasty, stable, permanently resilient when cured |
| pH value | Neutral |
| Electrical conductivity | Insulating |
| Elastic modulus 100\% | 0,6 ± 0,2 N/mm² |
| Tensile strength | 2,9 ± 0,2 N/mm² |
| Elongation at break | 600 ± 100 \% |
Ytterligare produktinformation
Vi skickar din beställning med PostNL. Följande gäller: beställt måndag till fredag före klockan 17 skickas samma dag. Vi erbjuder olika fraktalternativ. Du kan välja ett av alternativen under kassan.
Visa fraktkostnaderna förr
Frakt till EU (SE)
| Frakt metod | Beställningsbelopp under €77,48 | Beställningsbelopp över €77,48 |
| Brevlådespaketet | €5,20 | Inga leveranskostnder! |
| Paket med Track & Trace, ekonomi, upp till 2 kg | €9,33 | €4,13 |
| Paket med Track & Trace, Express | €13,46 | €8,26 |
Relaterade produkter
€5,11
Endast online, så mycket konkurrenskraftiga priser
Copyright © 2024 Packningsmaterial.se - Alla rättigheter reserverade.